EPSON TM T88V PAPER SIZE WINDOWS

Setting a specific Height in order to match the content is a workaround that was meaningful before we introduced the dedicated feature.ДЎ. I believe this is the appropriate setting for using this family of printers. Made sure our printer's paper size is the same, then performed two tests with the 'Print on continuous paper' turned on. Thank you for responding to my request and for the your detailed description.Д«ased on this, here is what I tried locally: In the link you can find the recorded steps for both scenarios and pictures of the results. If you need additional information just contact me/us. Hopefully these informations help you to find the problem.

EPSON TM T88V PAPER SIZE WINDOWS

I used Windows Problem step recorder so you can see what i have done.ДЎ - printing from sln usingВ uriReportSource.Uri = reportWithCustomPaperSize WRONG (too short)Дў - printimg from sln usingВ uriReportSource.Uri = reportWithContinuousPaper WRONG (too short)ДЇor all examples i used a Epson TM-T88VI with newest epson windows drivers, default papersize is set toВ Roll Paper 80 x 3276 mm I made some samples using Silviya's reports/sln. Hi Milen, sorry for late response, we were really busy. I will keep you updated if we find something on our end. Please send us exact steps to reproduce the issues you are facing, so that we can advance together in this, now that we can test with the physical device. Then we switched the printer default (or windows) setting to Roll Paper 80 x 3276 mm and got the same result without making any setup on the current print job (see the second attachment). The print correctly exceeds that size when the report is longer. We tested with the default printer setting for paper size: Roll Paper 80 x 297 mm. No need to change any PrinterSetting, either programmatically or thru the Print dialog. Please see the attached image (these are two separate prints). With its default setting and using the standalone designer the ContinuousPaper=true setting gets respected just as it should be: The whole report gets printed on a single sheet of paper and cut is performed after its end. We have now thermal roll-paper printer - it is Epson T-TM20II. Thank you in advance for your cooperation. This test would be of great help for us to further research the case.В If the output is cut to A4, then we would assume that there is something about the default printer settings of the current used printer. I understand there is something that breaks the printing and if it's possible to try to isolate it in a sample program which will print with the default printer settings without using any Reporting libraries. Unfortunately, we do not currently have such physical printer in our disposition to test print the report and give more specific advice. Either printing from the designer, or code-behind through Telerik Report Processor. Our development team investigated and tried to reproduce the strange behavior with the provided project from my previous answer, however, I'm afraid without much success. Honestly, I do understand that this is a serious issue and we have been investigating it on our side.

Epson tm t88v paper size